Vintage Olympus Power Bounce Grip 2 - Rare (Vg)

Bracket and Grip in Very Good Condition.

The Power Bounce Grip 2 adds off-camera flash and bounce flash possibilities to the T20 and T32, and gives the flash extra battery power with increased number of flashes and reduced recycling time.

• Size: 155 x 201 x 66mm
• Weight: 376g

The T32 (or T20) + Power Bounce Grip 2 combination works as
1) a higher output power source operating on four 1.5V "C" batteries
2) a grip type electronic flash unit
3) a bounce flash unit.
Auto bounce flash is possible in conjunction with a TTL Auto Cord T and the flash set to TTL "OTF" Auto flash.
A built-in TTL Auto Cord socket allows TTL "OTF" Auto flash with both the T20 and the T32.
The unit consists of a bracket and a removable grip for convenience in carrying and storing. The bracket with a built-in synch cord connects to the grip instantly.
The On/Off switch on the flash activates both the "AA" batteries in the flash and "C" batteries in the grip.
The recycling time with the T32 is 0.2~9sec. with Alkaline batteries and 0.2~7 sec with Ni-Cd batteries; the number of flashes is increased to 200~1000 in auto operation (0.2~10sec recycling time and 100~500 flashes for T32 used without Power Bounce Grip 2).
The angle of the Bounce Head can be adjusted from 90 degrees upward to 20 degrees downward, 60 degrees right and 240 Degrees left for convenient bounce flash close-up flash photography. The Bounce Head is locked by a lever.
This unit has a Motor Drive release button that allows operation of the Motor Drive or Winder by the right hand holding the unit.

Condition Report

Overall Condition Very Good (Vg) Body (Vg) 

The Accessory you're buying is actual one shown in all the photographs. 

30 Day full refund and 3 Month Warranty on Parts and Repair.